For the Bluebird chain, Odyssey took the proven and reliable KMC 510-HX chain and added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
- Sold in pairs. - Allen wrench included.
- For 19mm crank spindles and threaded Euro bottom bracket frames. - High-quality four bearing design with aluminum cups.
6061 aluminum with precision sealed mechanism bearing and lower (17mm) stack height.
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
Mike Aitken's original signature seat size and shape.
It’s a traditional straight up pivotal design with a 200mm length.
Odyssey Pursuit grips feature a wavy horizontal ribbing and other design cues to mimic how people usually wear their grips in. A textured section at the outer end allows for a very comfortable feel overall. The flat part of the grip takes its inspiration from Odyssey's popular Pursuit tire tread and the whole grip feels thin overall. - 155mm length. - Par Ends included.
Introducing the BOSS bar. Aaron Ross’ new signature handlebar now features a 9.125-inch rise along with a traditional 7/8-inch crossbar tubing for superior strength and durability on taller bars. SPECS - 9.125-inch rise - 29-inch width - 12° backsweep - 2° upsweep - Multi-Butted 41-Thermal® processed 4130 chromoly - Weight 34.6 oz
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.
Page 1 of 1